Bending

One of the busiest departments in Portland Bolt’s manufacturing facility is our bending area. Not a day goes by where we aren’t bending steel into some shape or another. The most common bending we do is in making 90-degree bent anchor bolts. However, while we make our fair share of standard anchor bolts, they are certainly not the only bolts being bent in our facility. We manufacture u-bolts, j-bolts, eye bolts, hook bolts, down guy anchors, and crane rail hooks. If you have the need for something completely out of the norm, send us a drawing and we will take a look at any custom bending you need.

If your drawings call for the bending of high strength and/or large diameter material, that’s no problem. Portland Bolt can fabricate up to 3” diameter round bar, and we have very few limitations in regards to the grade of material we are able to bend. We have six bending machines in our facility, and carry a large inventory of 90-degree bend anchor bolts from 1/2″ diameter all the way up to 1-1/4″. Just let us know how soon you need your bolts made, and we’ll do what we can to make sure your job stays on schedule.